S1 Self Coiling (Push Up/Pull Down) Roller Shutter
Our Series 1 self coiling roller shutters are a robust product ideally suited to protect commercial premises doorways and windows.
Each roller shutter is made to measure and CE marked, ensuring each product complies with European directives and gives you peace of mind.
All our Roller Shutters are manufactured in house at our facility in Leigh and are subject to continuous product development, ensuring the products we offer are of the highest quality whilst maintaining ease of installation.
Each roller shutter can be manufactured to suit your specific requirements, with a dedicated team on hand to give advice and technical support, we can back up an already high quality product with first class service and support.
- Bullet locks
- Centre Lock
- Weather canopy
- Perforated Curtain
- Punched Curtain
- Powder coated to any standard RAL or BS number
- Special colours available at customer request
PUSH UP / PULL DOWN
SHOPFRONT, DOCTORS SURGERY
2500mm WIDE x 2500mm HIGH
Cold Rolled 3” curved traditional lath, galvanised to BS729:1971, 22 swg (0.7mm thick). Alternate laths are fitted with high density glass filled nylon endlocks, which are double pop riveted to prevent lateral movement. The main curtain is attached to the shutter barrel using high tensile hexagon head set screws. A high strength galvanised (BS729:1971) inverted “T- Section” bottom rail is added to the base of the curtain, typically 1.6mm thick.
4” Outside diameter Electric Resistance Welded tube (BS 6323), complete with uniquely fabricated helical wound torsion spring assembly, for counterbalancing of the shutter curtain. The assembly is mounted within the tube on a 5/8” diameter steel shaft, complete with high density glass filled nylon bearing blocks, and high grade “sealed for life” bearings.
Endplates are constructed from flat 6mm thick mild steel plate (BS 1449) and bespoke mild steel “cups” are bolted to the endplate using high tensile hexagon head bolts, these “cups” are where the barrel shaft is supported. Fixing angles are formed using hot rolled angle section, 75mm x 50mm x 6mm, attached to the fixing angles are the galvanised (BS 729:1971) shutter guides, the guide section is typically 2 1/2” in depth x 1” inside dimension, the guide thickness is 3mm. The flags are coated in black zinc phosphate primer paint finish.
Bullet Pin or Central bottom rail type locks are fitted to each shutter as standard.
Each shutter is supplied with a wooden pole with a cast iron hook attached to the tip to aid ease of operation.
35 KGs Per Square Metre
Maximum Width: 2500
Sideroom Face Fix: 76mm Per Side
Sideroom Between Fix: Lose 70mm Per Side
Maximum Height: 2200, 2500
Headroom: 330mm, 350mm